Icom IC-7200 Advanced Instructions page 80

Previous view
6
FUNCTIONS FOR TRANSMIT
Split frequency operation (Continued)
■
CONVENIENT!
❍ QUICK SPLIT FUNCTION (p. 6-10)
When you hold down
function is set to ON, and the band, frequency and
mode of the undisplayed VFO is set the same as
those of the displayed VFO. (This operation is same
as steps and
e r
This shortens the time needed to start split frequency
operation.
The Quick split function is set to ON by default, but
can be turned OFF in the Set mode. (p. 10-10)
❍ XFC FUNCTION (p. 10-11)
When
the XFC (transmit frequency check) function is ON,
the transmit frequency can be changed (this opera-
tion is the same as steps
NOTE: When
lation function is disabled. (p. 5-2)
Set the XFC (transmit frequency check) function to
q
ON in the Set mode.
q Hold down
ter the Set mode.
w Rotate [M-CH] to select "XFC."
e Rotate [DIAL] to select ON.
M-CH/RIT
r Push
SET
While holding down
w
is displayed. Rotate [DIAL] to set the transmit fre-
quency.
• Also, the transmit frequency can be monitored while
holding down
for 1 second, the split
SPLIT
described on page 5-8.)
and to the left.)
t y
, the RIT calcu-
the XFC function is ON
M-CH/RIT
for 1 second twice to en-
SET
to exit the Set mode.
, the transmit frequency
RIT
.
RIT
XFC function is ON
6-9
3
SPLIT
7
[M-CH]
[DIAL]