D Quick Tuning Function; D Selecting 'Khz' Step - Icom IC-7200 Advanced Instructions

Previous view
3
BASIC OPERATION
Frequency setting (Continued)
■

D Quick tuning function

The operating frequency can be changed in steps of
0.1, 1, 5, 9 or 10 kHz selectable for quick tuning.
Push TS to turn ON the Quick tuning function.
q
• "Z" appears.
Rotate [DIAL] to change the frequency in pro-
w
grammed kHz steps.
Push TS again to turn OFF the Quick tuning func-
e
tion.
• "Z" disappears.
Rotate [DIAL] for normal tuning, if desired.
r

D Selecting 'kHz' step

When the Quick tuning function is selected, the fre-
quency can be changed in the selected 'kHz' steps.
• 0.1, 1, 5, 9 or 10 kHz are selectable.
Push to turn ON the Quick tuning function.
q TS
• "Z" appears.
Hold down
w TS
step Set mode.
[DIAL] to select the desired tuning step of
Rotate
e
0.1, 1, 5, 9 or 10 kHz.
Push to exit the tuning step Set mode.
r TS
Rotate [DIAL] to change the frequency according
t
to the set tuning step.
Push to turn OFF the Quick tuning function.
y
TS
• "Z" disappears.
for 1 second to enter the tuning
Appears
Appears
Tuning step Set mode
3-7
[DIAL]
Hold down TS
[DIAL]