D Convenient Functions For Receiving - Icom IC-7200 Advanced Instructions

Previous view
4
RECEIVE AND TRANSMIT
Operating in the CW mode (Continued)
■

D Convenient functions for receiving

• Preamp and attenuator (p. 5-3)
P.AMP
Push to turn the preamp ON or OFF.
➥
ATT
• " " appears when the preamp is ON.
P.AMP
Hold down
➥
ATT
tenuator.
• " " appears when the attenuator is ON.
P.AMP
• Push to turn OFF the attenuator.
ATT
• Twin PBT (passband tuning) (p. 5-4)
[TWIN PBT] (controls–inner/outer).
Rotate
➥
• AGC (auto gain control) (p. 5-3)
Push once or twice to set the AGC time con-
➥
AGC
stant to fast or slow.
• "F.AGC" appears when the fast time constant is select-
ed, and no icon appears when the slow time constant
is selected.
Hold down
➥ AGC
AGC function.
• "AGC-OFF" appears.
• Noise blanker (p. 5-7)
Push to turn the noise blanker ON or OFF.
➥ NB
• " " appears when the noise blanker is ON.
Hold down
NB
➥
blanker Set mode. Rotate [M-CH] to select the
item, then rotate [DIAL] to adjust the threshold
level, or the blank width.
• Noise reduction (p. 5-8)
Push to turn the noise reduction ON or OFF.
➥ NR
• " " appears when the noise reduction is ON.
Hold down
➥ NR
reduction level Set mode, then rotate [DIAL] to ad-
just the noise reduction level.
for 1 second to turn ON the at-
for 1 second to turn OFF the
for 1 second to enter the noise
for 1 second to enter the noise
[TWIN PBT]
4-6
[DIAL]
[M-CH]
[DIAL]