Memory Channel Programming; D Programming In Vfo Mode; D Programming In Memory Mode - Icom ic-7700 Instruction Manual

■ Memory channel programming

D Programming in VFO mode

[EXAMPLE]:
Programming 7.088 MHz/LSB into memory channel 12.
or
MW

D Programming in memory mode

[EXAMPLE]:
Programming 21.280 MHz/USB into memory channel 18.
or
MW
Y Z
MW
SSB
Beep
Hold down for 1 sec.
Beep
Beep
then
21
7
Beep
Hold down for 1 sec.
Beep
Beep
Memory channel programming can be preformed ei-
ther in VFO mode or in memory mode.
q Set the desired frequency, operating mode and fil-
ter width in VFO mode.
∫
w Push
sired memory channel.
• Memory list screen is convenient for selecting the de-
sired channel.
• Memory channel contents appear in the memory chan-
nel readout (below the frequency readout).
• "--.---.--" appears if the selected memory channel is a
blank channel (and does not have contents).
e Hold down
displayed frequency, operating mode, etc., into the
memory channel.
q Select the desired memory channel with
√ in memory mode.
• Memory channel contents appear in the memory chan-
nel readout (below the frequency readout).
• "--.---.--" appears if the selected memory channel is a
blank channel (and does not have contents).
w Set the desired frequency and operating mode in
SSB
memory mode.
• To program a blank channel, use direct frequency entry
with the keypad or memo pads, etc.
e Hold down
displayed frequency and operating mode into the
memory channel.
8-3
MEMORY OPERATION
√
/ several times to select the de-
MW for 1 second to program the
for 1 second to program the
MW
8
∫
/