D Setting The Compression Level - Icom IC-7200 Advanced Instructions

Previous view
6
FUNCTIONS FOR TRANSMIT
Speech compressor
■

D Setting the compression level

• Setting the microphone gain
MODE
Push to select SSB mode.
q
• Hold down
MODE
USB and LSB modes.
Push to turn OFF the speech compressor
w
COMP
function, if it is ON.
• " " disappears.
ANF
Hold down
e
METER
lect ALC meter.
• "ALC" appears.
Adjust the MIC gain
r
below)
q Hold down
Quick Set mode.
w Rotate [M-CH] to select "MIC GAIN" to set the
microphone gain.
e While transmitting, speak at a normal voice lev-
el and rotate [DIAL] to adjust the microphone
gain so that the ALC meter reads within the
ALC zone, whether you speak softly or loudly.
• Hold down
fault value.
r Push M-CH/RIT
SET
• Setting the compression level
ANF
Hold down
q
METER
lect ALC meter.
• "ALC" appears.
w Hold down
COMP
compression level Set mode.
• The speech compressor function is set to ON and
" " appears.
You can enter the speech compression level Set
mode before selecting ALC meter in step q.
While transmitting, speak at a normal voice level
e
and rotate [DIAL] to adjust the speech compres-
sion level so that the ALC meter reads within the
ALC zone, whether you speak softly or loudly.
• Adjust the level to between 0 and 10, in one unit steps.
• Hold down
M-CL
value.
r Push
COMP
Set mode.
Push to turn the speech compressor func-
t
COMP
tion OFF when it is not necessary.
• " " disappears.
NOTE: If the ALC meter peaks above the ALC
zone, your voice may be distorted.
for 1 second to toggle between the
for 1 second several times to se-
in the Quick Set mode. (See
M-CH/RIT
for 1 second to enter the
SET
for 1 second to return to the de-
M-CL
to exit the Quick Set mode.
for 1 second several times to se-
for 1 second to enter the speech
for 1 second to return to the default
to exit the speech compression level
ALC zone
Level 5 (default)
ALC zone
6-7
[DIAL] [M-CH]
50% (default)
[DIAL]