Replacing Consumables; Check For Remaining Amount Of Consumables - Riso EZ5 Series User Manual

REG-ML_EN.book Page 206 Wednesday, September 21, 2011 5:19 PM

Replacing Consumables

Check for Remaining Amount of Consumables

The machine checks and reports on remaining amount of ink, master, as well as the space left in the disposal box.
Note:
• The report may not be displayed if detection fails.
• The reported amount is for reference only and may not be perfectly accurate.
1
Touch [i Info] on the Basic Screen.
Ready to Make Master
Basic Selections
Page(A4) Contrast
Auto
Line
Dot
Reserva-
Process
tion
Black
2
Check for remaining amount of con-
sumables.
Info
Consumables Amount
Master
Ink
Disposal Box Space
Disposal
Drum Information
A3 Black
When running low, be sure to restock supply.
• Master ( p.208)
• Ink ( p.211)
• Master Disposal (used master) ( p.213)
206
Check for Remaining Amount of Consumables
Functions Admin.
Size Paper
A4
Multi-Up
Editor
Print
I dl e I n fo
Close
Date and Time
08 / 10 2011 /
My Counter
15 : 32
Ink Saving
Display Details
Indicator/ Description
Message
The black bar indicates
the remaining amount.
Ex:
approximately 10% left
(Unknown), Indicates that consumable
---, data is not available, is not
no display set, etc.
About the "My Counter" screen
When the "Management Level" in the User
Management is set to "High/Full Manage-
ment", touch [My Counter] to display "My
Counter" screen.
On the "My Counter" screen, you can confirm
the current user's Limit C/C, M/C and Present
C/C, M/C. Limit C/C and M/C are set by the
administrator. Consult your administrator for
details.
My Counter
U-1(G-1)
Limit C/C
Present C/C
Limit M/C
Present M/C
Close