Making A Master That Utilizes The Maximum Printing Area [Max. Scan] - Riso 590 User Manual

Functions for Master-Making
Making a Master that Utilizes the Maximum
Printing Area
When a master is made, automatic paper size detection and image size adjustment applies to allow appropriate print
margins. This is to prevent paper jams, and to keep internal roller free of ink stains.
By selecting "Max. Scan", maximum printing area will apply to the scanned image, regardless of the print paper size
or original document size.
Be sure to check the sizes of the original document and the printing paper first.
p.18
Maximum printing area
EZ590: 291 mm × 425 mm (11
EZ570: 291 mm × 413 mm (11
Important!:
• The 5 mm ( / ") margin on the top cannot be scanned even in the "Max. Scan" setting.
3
16
• Do not use print paper smaller than the area of the image made on the master. This may cause ink stains.
• The entire surface of the Glass Platen must be clean.
By scanning the maximum size, dirt found outside the original document area will also be included in the master.
This may cause the internal roller to be stained with ink.
1
Touch [Functions] on the Master
Making Basic Screen.
Ready to Make Master
Basic Selections
Image Contrast
Auto
L i n e
Dot
Reserva-
Process tion
Black
2
Touch [Max. Scan].
Ready to Make Master
Basic Selections
Side Margin
Max. Scan
Reservation
ADF Semi-Auto
"Max. Scan" is selected.
86

Making a Master that Utilizes the Maximum Printing Area [Max. Scan]

[Max. Scan]
" × 16
/ / ")
7 3
16 4
/ " × 16 / ")
7 1
16 4
Functions Admin.
Size Paper
A4
Multi-Up
Editor
Print
Idl e I nf o
Functions Admin.
Preview
Overlay
Storage Memory
USB Job List
P. 2/4