Place And Answer Calls; Call By Entering A Name Or Number - Polycom realpresence group 300 User Manual

User Guide for the Polycom RealPresence Group Series and the Polycom Touch Control
To pair with a RealPresence Group system:
1 Do one of the following:
 After you power on the Polycom Touch Control, a Connect to Device screen is displayed. Enter
the IP address for the RealPresence Group system. Touch Connect.
 From your Home screen, touch
Under Device Connection status, touch
and password for your Polycom Touch Control. Enter the RealPresence Group system IP
address.
2 Enter the ID and password of the RealPresence Group system.
3 Touch Next.
The pairing connection begins. A message displays when the connection is successful.
To disconnect from a Group system:
1 On the Home screen, touch
2 Under Device Connection Status, touch
3 Touch View Pairing Settings.
4 Enter your Admin ID and Admin Password.
5 Touch Forget This Device.
The IP Address field is now blank.

Place and Answer Calls

To place, answer, and end calls, refer to the following sections:

Call by Entering a Name or Number

Answer a Call
Call Screen
End a Call
Call by Entering a Name or Number
To place a call by entering a name or number:
1 From the Home screen, touch
2 In the dialing field, enter the dialing information as follows:
Letters: To enter letters, touch
Backspace: To backspace, touch
Depending on the capabilities of your system and the system you are calling, the dialing information
could look like one of these examples:
 10.11.12.13 (IPv4 address—include the dots)
Polycom, Inc.
and then touch the RealPresence Group Series system tab.
. Touch View Pairing Settings. Enter the admin ID
then touch the RealPresence Group Series System tab.
.
.
. Touch and hold keys to access accented characters.
.
12