Realpresence Group Series User Interface; Ways To Place, Answer, And End Calls - Polycom realpresence group series User Manual

To power off RealPresence Group 300, 310, 500, and 700 systems:
1 Touch the power sensor on the front of the system. The indicator light changes color and blinks,
which means that the system is shutting down.
2 Release the power sensor when the indicator light changes color.

RealPresence Group Series User Interface

Cycle through the icons at the bottom of the Home screen to access system features. To accomplish tasks,
you can press buttons directly on your remote control or use your remote control to navigate menus on the
left side of the local user interface.
Available icons on the home screen vary based on how your administrator configured the system.
Your system IP address, extension, and SIP address might be displayed on the home screen if your
administrator has configured them to be visible.
Icon Description
Menu - Displays the Menu screen, which allows you to place a call, change cameras, show content
in a call, and show the Self View (PIP).
Place a Call - Displays the keypad, recent calls, or contacts so that you can enter numbers, letters,
or names to make a call.
Content - Allows you to send content from a supported device. This icon appears only when a
content source is detected.
Settings - Displays the Settings screen, which allows you to open one of the following screens:
System Information - Displays the System Information screen, which allows you to obtain system
details, view system usage, run diagnostic tests, and view call statistics.
User settings
settings and to configure call and meeting preferences. This screen is only available if your
administrator has allowed you access to the user settings.
Administration
settings, specify LAN properties, and manage some user security settings. This screen is only
available if your administrator has allowed you access to the administration settings. Once an admin
password is configured, this icon changes to a padlock.

Ways to Place, Answer, and End Calls

To place, answer, and end calls, refer to the following sections:
Call by Entering a Name or Number
Call from the Contacts Screen
Call from the Recent Calls List
Call a Speed Dial Entry
Answer a Call
Polycom, Inc.
-
Displays the User Settings screen, which allows you to change basic camera
-
Displays the Administration screen, which allows you to configure location
15