Changing The User Name - Abus AZ4150 Operating Instructions Manual

Confirm your input by pressing:
The control unit shows:
UK
If you do not want to change the user name, press the
following key:
the section "Changing a name" on page 11.
After confirming the input of the user name, you are asked
to enter the new user code.
The control unit shows:
Enter the new four-digit code. Do not use a "0" (zero) as
the first digit.
Confirm your input and press the following key:
IMPORTANT: To delete a code, enter
.
. If you want to change the name, see
0 0 0 0
.
9.3

Changing the user name

Enter the user name (max. 12 characters) via the keypad.
In the following, the zone name "HOFNED" is entered.
On the control unit, enter:
.
If you make a mistake, you can move the cursor back by
pressing the D key
You can delete a letter or digit by entering a blank at the
respective position with the 0 key
After entering a new user name, confirm your input.
On the control unit, enter:
12
H
next position ->
O
next position ->
- F
- next position ->
- N
- next position ->
- E
- next position ->
- D
.
.
.