Option 8-2: User Name - Abus Terxon LX Administration Manual

Prox Tag or Code
----
User 05 Prtns
Ptns > 1*......
User menu
8:Set Up Users
User Codes 2
User Name
User 01
User 01
Administration Manual – Terxon L
Important: ..................................................................................................................
Press to view the numbers of already defined users. Press any key to
return to the previous display.
4. Now enter the user code (4- or 6-digit; see Installation Instructions, Option
47) and confirm with
If you press
retained.
Important: ..................................................................................................................
If a message "NOT ACCEPTED" appears, this indicates that this code has
already been assigned, and you must enter another code. Press
another code.
5. Press and
(please see "User types" on page 10) and confirm with
6. Press the number keys to select the partitions to which the user is to have
access and confirm with
the user. (A "*" means that the partition is not assigned, and a "." means
that you have no access to this partition.)
Important: ..................................................................................................................
If the Local Setting option is selected (Installation Instructions, Option 45-11),
the user can activate the system only if the operating panel is assigned to the
respective partition.
7. Go to step 3 or press

2.8.3. Option 8-2: User Name

Select this option for entering a name for each user. If you view the event list (see
Event Messages on page 17), you can press
user number and user name for the corresponding event entries. Up to 15
characters are possible.
1. Press to select this option.
2. Press and
3. Press and
with .
4. Enter a user name by pressing the number keys containing the letters you
want (see chapter 3 "Letter Keys" on page 15).
Confirm the selection with
5. Press to exit the menu.
12
or use the chip-key.
without entering a new code, the previous code is
or press a number key (1–9) to select the user type
. Every displayed partition is now assigned to
to exit the menu.
or 2 to select user name and confirm with
to select a user or enter the user number and confirm
.
.
to switch between the displayed
and try
.