Ricoh D072 Service Manual page 90

Printer/Scanner Unit
7. Install the ground plate [A] (
Insert the upper and lower hooks in the openings [B], and fasten the upper
screw first.
8. Install the controller box [C] (
Insert the bracket [D] into the frame. The connector on the controller box
engages with the connector on the BICU.
9. Install PostScript 3 as necessary.
10. Remove the front left cover [A] (
11. Retain the screws and use them in the next step.
12. Install the multi-function panel [B] (
D067/D068/D069/D072
x 2).
x 6).
x 2).
x 1, x 2).
2-44 SM