Ricoh D072 Service Manual page 381

System Service Mode (F/SPF: D068/D069)
Vendor ID
002 Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
[0x0000 to 0xFFFF/1] DFU
Product ID
003
Sets the product ID.
[0x0000 to 0xFFFF/1] DFU
Device Release No.
Sets the device release number of the BCD (binary coded decimal) display.
004
[0000 to 9999/1] DFU
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
Delivery Server Setting
5845
Provides items for delivery server settings.
FTP Port Num
001
Sets the FTP port number used when image files to the Scan Router Server.
Srv IP (Primary)
002
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be referenced by the initial system setting.
Retry Interval
003
Specifies the interval time for sending the scanned image data to the deliver
server or SMTP/FTP/NCP/SMB server after sending error.
No. of Retries
004
Specifies the retry times for sending the scanned image data to the deliver
server or SMTP/FTP/NCP/SMB server after sending error.
D067/D068/D069/D072
CTL
CTL
CTL
CTL -
[ 0 to 65535 / 3670 / 1 /step]
Range: 000.000.000.000 to 255.255.255.255
[60 to 999 / 300 / 1 second /step]
[0 to 99 / 3 / 1 time/step]
5-72 SM Appendix