Ricoh D072 Service Manual page 471

System Service Mode (Basic: D067/D072)
4930* Sharpness-Edge
4930 1 Copy
4931* Sharpness-Solid
4931 1 Copy
Sharpness-Low ID
4932*
4932 1 Copy
White Line Erase
4941*
Selects the white line erase level.
0: None, 1: Weak, 2: Strong
This setting is effective for all modes.
4941 1
0: White line erase is not used, and white level correction is used instead·
This setting is applied regardless of what mode has been selected in
SP4-921.
4942* Black Line Erase
Selects the black line erase level. This setting is effective only when originals
are scanned by the DF.
4942 1 [0 = No / 1 = Very weak / 2 = Weak / 3 = Strong]
This setting is applied regardless of what mode has been selected in
SP4-921.
D067/D068/D069/D072
[–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to
the originals in SP4-921.
[–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the
originals in SP4-921.
[–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to
the originals in SP4-921.
[0 to 2 / 1 / 1/step]
[0 to 3 / 2 / 1/step]
5-162 SM Appendix