Ricoh D072 Service Manual page 446

1001 Bit Switch
005 Bit Switch 5
bit 0 DFU
bit 1 Multiple copies if a paper size or type
mismatch occurs
If a paper size or type mismatch occurs during the printing of multiple
copies, only a single copy is output by default. Using this BitSw, the device
can be configured to print all copies even if a paper mismatch occurs.
bit 2 DFU
bit 3 [PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs
to 1000 jobs.
Enabled: Changes the maximum number of jobs that can be stored on the
HDD via Job Type settings to 1000. The default is 100.
bit 5 DFU
bit 6 Method for determining the image
rotation for the edge to bring on
Enabled: The image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed orientation
jobs. The old models are below:
-PCL-: Pre-04A models
SM Appendix
System Service Mode (F/SPF: D068/D069)
0
-
Disabled
(single
copy)
-
Pattern3
Disable
(100)
-
Disable
5-137
1
-
Enabled
(multiple)
-
Pattern1
Enable
(1000)
-
Enable
D067/D068/D069/D072