Ricoh D072 Service Manual page 289

SC Tables (F/SPF: D068/D069)
Application function selection error
The application selected by a key
997 C
press on the operation panel
does not start or ends
abnormally.
Application start error
After switching the machine on,
998 B
the application does not start
within 60 s. (No applications start
or end normally.)
D067/D068/D069/D072
Software for that application is
defective
An option required by the
application (RAM, DIMM, board)
is not installed.
Too complicated nest of the fax
group address
1. As for the fax operation problem,
simplify the nest of the fax group
address.
Software for that application is
defective
An option required by the
application (RAM, DIMM, board)
is not installed.
1. Check the setting of
SP5875-001. If the setting is set
to "1 (OFF)", change it to "0
(OFF)".
3-34 SM Appendix