Ricoh D072 Service Manual page 412

SP8-XXX (History)
Most of the SPs in this group are prefixed with a letter that indicates the mode of operation
(the mode of operation is referred to as an "application"). Before reading the Group 8
Service Table, make sure that you understand what these prefixes mean.
Prefixes
T: Total: (Grand Total).
C: Copy application.
F: Fax application.
P: Print application.
S: Scan application.
Other applications
(external network
O:
applications, for
example)
The Group 8 SP codes are limited to 17 characters, forced by the necessity of displaying
them on the small LCDs of printers and faxes that also use these SPs. Read over the list of
abbreviations below and refer to it again if you see the name of an SP that you do not
understand.
Key for Abbreviations
SM Appendix
System Service Mode (F/SPF: D068/D069)
What it means
Grand total of the items counted for all
applications (C, F, P, etc.)..
Totals (pages, jobs, etc.) executed for each
application when the job was not stored on the
document server.
Refers to network applications such as Web
Image Monitor. Utilities developed with the SDK
(Software Development Kit) will also be counted
with this group in the future.
5-103 D067/D068/D069/D072