Ricoh D072 Service Manual page 600

IP-Fax Switch 01
No. FUNCTION
Select IP FAX Delay Level
Bit3 Bit2 Bit1
0 0 0
0 0 0
0-3
0 0 1
0 0 1
4-7 IP Fax preamble wait time setting
IP Fax Switch 02 [SP No. 1-111-003]
No. FUNCTION
IP Fax bit signal reverse setting
0 0: Maker code setting
1: Internal bit switch setting
SM Appendix
Raise the level by selecting a higher setting
if too many transmission errors are occurring
Bit0 Setting
on the network.
If TCP/UDP is enabled on the network, raise
0 Level 0
this setting on the T.30 machine. Increasing
1 Level 1
the delay time allows the recovery of more
lost packets.
0 Level 2
If only UDP is enabled, increase the number
1 Level 3
of redundant packets.
Level 1 to 2: 3 Redundant packets
Level 3: 4 Redundant packets
Selects the preamble wait time.
[00 to 0f]
There are 16 values in this 4-bit binary
switch combination.
Waiting time: set value level x 100 ms
Max: 0f (1500 ms) Min: 00 (No wait time)
The default is "0000" (00H).
When "0" is selected, the bit signal reverse
method is decided by the maker code.
When "1" is selected, the bit signal reverse
method is decided by the internal bit switch.
(When communicating between IP Fax
devices, LSB first is selected.)
7-61
Bit Switches
COMMENTS
COMMENTS
D067/D068/D069/D072