Ricoh D072 Service Manual page 331

System Service Mode (F/SPF: D068/D069)
Sharpness-Low ID
4932*
Adjust the clarity. This setting is only applied to the originals in SP4-921.
001 Copy
002 Fax
003 Scanner
4935* Color Image Adjust
Main Scan MTF Level
001 Adjust the MTF level for the main scan. This setting is only activated for the
specified mode with SP4-921-004.
0: None, 1: Weak, 2: Middle, 3: Strong
Main Scan MTF Strength
002 Adjust the MTF strength for the main scan. This setting is only activated for
the specified mode with SP4-921-004.
0: 1, 1: 1/32, 2: 1/16, 3: 1/8, 4: 1/4, 5: 1/2
Sub Scan MTF Level
003 Turns on or off the MTF for the sub scan. This setting is only activated for the
specified mode with SP4-921-004.
0: No, 1: Yes
Sub Scan MTF Strength
004 Adjust the MTF strength for the sub scan. This setting is only activated for the
specified mode with SP4-921-004.
0: 1, 1: 1/32, 2: 1/16, 3: 1/8, 4: 1/4, 5: 1/2
D067/D068/D069/D072
[–2 to 2 / 0 / 1/step]
[0 to 3 / 0 / 1/step]
[0 to 5 / 0 / 1/step]
[0 or 1 / 0 / 1/step]
[0 to 5 / 0 / 1/step]
5-22 SM Appendix