Ricoh D072 Service Manual page 484

Reset–PM Counter
7804
Resets the PM counter (SP7-803-001). When the program ends normally, the
7804 1
message "Completed" is displayed.
Reset–SC/Jam Counters
7807
Resets the SC, paper, original, and total jam counters. When the program
ends normally, the message "Completed" is displayed. SP7-807-1 does not
7807 1
reset the following logs: SP7-507 (Display-Paper Jam History) and SP7-508
(Display-Original Jam History).
7808 Reset–Counters
Resets all counters except for the management counters. The management
counters are the counters that are not changed by NVRAM Download
7808 1
(SP5-825-001;
ends normally, the message "Completed" is displayed.
7810 Reset–Key Op Code
Resets the key operator code. Use SP7-810-1 when the customer has
forgotten the key-operator code. If the customer has forgotten the key
operator code, a new one can be specified by using: User Tools: System
7810 1
Settings → Key Operator Tools → Key Operator Code → On → Enter Key
Operator Code. When the program ends normally, the message "Completed"
is displayed, if the program ends abnormally, an error message is displayed.
7832* Display-Self-Diag
Displays the SC codes and the number of their occurrences. Each number is
7832 1
in the range of 0 to 9999.
SM Appendix
System Service Mode (Basic: D067/D072)
"NVRAM Data Upload/Download"). When the program
5-175 D067/D068/D069/D072