Ricoh D072 Service Manual page 379

System Service Mode (F/SPF: D068/D069)
Channel MIN
Sets the minimum number of channels available for data transmission via the
007
wireless LAN. The number of channels available varies according to location.
The default settings are set for the minimum end of the range for each area.
Adjust the lower 4 bits to set the minimum number of channels. DFU
WEP Key Select
011
Selects the WEP key.
Fragment Thresh
042
Adjusts the fragment threshold for the IEEE802.11 card.
This SP is displayed only when the IEEE802.11 card is installed.
11g CTS to Self
043
Determines whether the CTS self function is turned on or off.
This SP is displayed only when the IEEE802.11 card is installed.
11g Slot Time
044
Selects the slot time for IEEE802.11.
WPA Debug Lyl
045
Selects the debug log for WPA authentication application.
This SP is displayed only when the IEEE802.11 card is installed.
D067/D068/D069/D072
CTL
Do not change the setting.
CTL
CTL
CTL
CTL
CTL
[ 1 to 11 or 13 / 1 / 1 /step]
Europe: 1 to 13
NA/ Asia: 1 to 11
[00 to 11 / 00 / 1 binary]
00: Key #1
01: Key #2 (Reserved)
10: Key #3 (Reserved)
11: Key #4 (Reserved)
[256 to 2346 / 2346 / 1]
[0 to 1 / 1 / 1] 0: Off, 1: On
[0 to 1 / 1 / 1] 0: 20µm, 1: 9µm
[0 to 3 / 3 / 1]
1: Info, 2: Warning, 3: Error
5-70 SM Appendix