Ricoh D072 Service Manual page 639

Service RAM Addresses
Bit 1: Maximum document length detection 0: Double letter, 1: Longer than double-letter
(well log) – up to 1,200 mm
Bit 2: Not used
Bit 3: Fax mode settings, such as resolution, before a mode key
(Copy/Fax/Printer/Scanner) is pressed 0: Not cleared, 1: Cleared
Bits 4 to 7: Not used
6800DF(H) - User parameter switch 15 (SWUSR_0F)
(This switch is not printed on the user parameter list.)
Bits 0, 1 and 2: Cassette for fax printout
Bit 2: 0, Bit 1: 0, Bit 0: 1 = 1st paper feed station
Bit 2: 0, Bit 1: 1, Bit 0: 0 = 2nd paper feed station
Bit 2: 0, Bit 1: 1, Bit 0: 1 = 3rd paper feed station
Bit 2: 1, Bit 1: 0, Bit 0: 0 = 4th paper feed station
Bit 2: 1, Bit 1: 0, Bit 0: 1 = LCT
Other settings Not used
Bits 3 and 4: Not used
Bit 5: Using the cassette specified by bits 0, 1 and 2 above only 0: On, 1: Off
Bits 6 and 7: Not used
6800E0(H) – User parameter switch 16 (SWUSR_10)
(This switch is not printed on the user parameter list.)
Bits 0 and 1: Not used
Bit 2: Paper size selection priority for an A4 size fax message when A4/LT size paper is not
available. 0: A3 has priority, 1: B4 has priority
Bits 3 to 7: Not used
6800E1(H) – User parameter switch 17 (SWUSR_11)
Bit 0: Not used
⇒
Bit 1: Disable Broadcasting: To avoid accidentally specifying multiple destinations, users
can disable broadcasting. They cannot specify group destinations if they disable
broadcasting. They can specify only one address at a time.
Bit 2: Inclusion of the "Add" button when a sequence of Quick/Speed dials is selected for
broadcasting
⇒
Bits 3, 5 and 6: Not used
⇒
Bit 4: Display Destination Prior to transmission: To prevent documents being sent to the
wrong destination, users can configure the machine to display the destination again after it
has been entered and before the file is sent.
Bit 7: Press "Start" key without an original when using the on hook dial or external phone, 0:
displays "Cannot detect original size". 1: Receives fax messages.
6800E2(H) - User parameter switch 18 (SWUSR_12)
Bit 0: TTI date 0: Off, 1: On
D067/D068/D069/D072
0:Not needed, 1: Needed
1: On, 0: Off
7-100
Rev. 05/14/2009
1: On, 0: Off
SM Appendix