Ricoh D072 Service Manual page 556

System Switch 10 [SP No. 1-101-017]
No FUNCTION
Threshold memory level for
0-7
parallel memory transmission
System Switch 11 [SP No. 1-101-018]
No FUNCTION
TTI printing position
0: Superimposed on the page
0 data
1: Printed before the data
leading edge
1 Not used
2-7 Not used
System Switch 12 [SP No. 1-101-019]
No FUNCTION
TTI printing position in the
0-7
main scan direction
SM Appendix
COMMENTS
Threshold = N x 128 KB + 256 KB
N can be between 00 - FF(H)
Default setting: 02(H) = 512 KB
COMMENTS
Change this bit to 1 if the TTI overprints
information that the customer considers to be
important (G3 transmissions).
Japan Only
Do not change the factory settings.
COMMENTS
TTI: 08 to 92 (BCD) mm
Input even numbers only.
This setting determines the print start position for
the TTI from the left edge of the paper. If the TTI is
moved too far to the right, it may overwrite the file
number which is on the top right of the page. On
an A4 page, if the TTI is moved over by more than
50 mm, it may overwrite the page number.
7-17
Bit Switches
D067/D068/D069/D072