Ricoh D072 Service Manual page 492

5.2.3 OUTPUT CHECK (SP5-804)
Conducting Output Check
To prevent mechanical or electrical damage, do not keep an electrical component
on for a long time.
1. Select SP5-804.
2. Select the number (see the table below) corresponding to the component.
3. Select "ON."
4. To stop the operation, select "OFF."
Output Check Table
Num.
001 Main M- Fwd
002 Main M- Rev
003 Quenching Lamp
004 Toner Sup CL
005 Fan M- High
006 Fan M- Low
007 Registration CL
008 By-pass Feed CL
009 Upper Feed CL
010 BK-Upper Feed CL
015 BK-Lower Feed CL
020 Duplex Inv M- Rev
021 Duplex Inv M- Fwd
SM Appendix
System Service Mode (Basic: D067/D072)
Component
5-183 D067/D068/D069/D072