Ricoh D072 Service Manual page 567

Bit Switches
Text String for Return Receipt
This setting determines the text string output for the Return Receipt that confirms
the transmission was received normally at the destination.
00: "Dispatched"
Sends from PC mail a request for a Return Receipt. Receives the Return Receipt
with "dispatched" in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; dispatched
The "dispatched" string is included in the Subject string.
01: "Displayed"
2-3
Sends from PC mail a request for a Return Receipt. Receives the Return Receipt
with "displayed" in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; displayed
The "displayed" string is included in the Subject string.
10: Reserved
11: Reserved
A mail requesting a Return Receipt sent from an IFAX with this switch set to "00"
(for "dispatched") received by Microsoft Outlook 2000 may cause an error. If any
setting other than "displayed" (01) causes a problem, change the setting to "01" to
enable normal sending of the Return Receipt.
Media accept feature
This setting adds or does not add the media accept feature to the answer mail to
confirm a reception.
4
0: Does not add the media accept feature to the answer mail
1: Adds the media accept feature to the answer mail.
Use this bit switch if a problem occurs when the machine receives an answer mail,
which contains the media accept feature field.
5-6 Not Used
D067/D068/D069/D072 7-28 SM Appendix