Ricoh D072 Service Manual page 359

System Service Mode (F/SPF: D068/D069)
010 RCG Read Timeout
011 Port 80
013 RFU Timing
Install Status
This SP displays the RCG device installation status.
022
0: RCG device not registered
1: RCG device registered
2: Device registered
Connect Mode (N/M)
023 This SP displays and selects the embedded RCG connection method.
0: Internet connection
1: Dial-up connection
NotiTime ExpTime DFU
061
Proximity of the expiration of the certification.
HTTP Proxy Use
062
This SP setting determines if the proxy server is used when the machine
communicates with the service center.
D067/D068/D069/D072
Specifies the read timeout interval when calling the
RCG.
[1 to 100 / 60 / 1 second/step]
Enables/disables access via port 80 to the SOAP
method.
[0 or 1 / 0 / – ]
0: Disabled, 1: Enabled
Selects the timing for the remote firmware updating.
[0 or 1 / 0 / – ]
0: Any status of a target machine
1: Sleep or panel off mode only
5-50 SM Appendix