Ricoh D072 Service Manual page 503

Fax Error Codes
Code Meaning
The other terminal is not
0-15 capable of specific
functions.
CFR or FTT not detected
after modem training in
0-16
confidential or transfer
mode
Facsimile data not
0-20 received within 6 s of
retraining
D067/D068/D069/D072
Suggested Cause/Action
The other terminal is not capable of accepting the
following functions, or the other terminal's memory
is full.
Confidential rx
Transfer function
SEP/SUB/PWD/SID
Check the line connection.
Replace the NCU or FCU.
Try adjusting the tx level and/or cable
equalizer settings.
The other end may have disconnected, or it
may be defective; try calling another machine.
If the rx signal level is too low, there may be a
line problem.
Cross reference
See error code 0-08.
Check the line connection.
Replace the NCU or FCU.
Check for line problems.
Try calling another fax machine.
Try adjusting the reconstruction time for the
first line and/or rx cable equalizer setting.
Cross reference
Reconstruction time - G3 Switch 0A, bit 6
Rx cable equalizer - G3 Switch 07 (PSTN)
6-4 SM Appendix