Ricoh D072 Service Manual page 451

System Service Mode (Basic: D067/D072)
5.2 SYSTEM SERVICE MODE (BASIC: D067/D072)
5.2.1 SERVICE MODE TABLES
SP1-XXX (Feed)
1001* LE Registration
1001 1 All Trays
1001 2 By-pass
1001 3 Duplex
1002* S-to-S Regist
1002 1 1st Tray
1002 2 2nd Tray
1002 3 3rd Tray
1002 5 By-pass
1002 6 Duplex
Paper Feed Timing
1003*
1003 1 1st tray
1003 3 Bank Trays
1003 4 By-pass
1003 5 Duplex
D067/D068/D069/D072
[–9.0 to 9.0 / 0.0 / 0.1 mm/step]
Adjusts the leading-edge registration
( "Adjusting Copy Image Area" in the section
"Replacement and Adjustment").
[–9.0 to 9.0 / 0.0 / 0.1 mm/step]
Adjusts the side-to-side registration (
"Adjusting Copy Image Area" in the section
"Replacement and Adjustment"). SP1-002-001
is applied to all trays. SP1-002-002, 003 and
005 adjusts the difference from SP1-002-001.
Adjusts the side-to-side registration of the 2nd
side in duplex copying. The 1st side is adjusted
by SP1-002-001 through 005.
Adjusts the amount of paper buckle on the
registration roller.
[0 to 10 / 5 / 1 mm/step]
[0 to 10 / 5 / 1 mm/step]
[0 to 10 / 5 / 1 mm/step]
[0 to 20 / 5 / 1 mm/step]
5-142 SM Appendix