Table of Contents
Advertisement
3.
Turn the SD-card label face [A] to the rear of the machine. Then push it slowly into slot
1 until you hear a click.
4.
Connect the network cable if it needs to be connected.
5.
Turn on the main power switch.
6.
Input a machine serial number with SP 5811-001.
7.
Go into the SP mode and push "EXECUTE" with SP5-878-001.
8.
Exit the SP mode and turn off the operation switch. Then turn off the main power
switch.
9.
Turn on the machine power.
10. Go into the User Tools mode, and select System Settings> Administrator Tools> Auto
Erase Memory Setting> On.
11. Exit the User Tools mode.
SM
2-59
Controller Options
D067/D068/D069/D072
Advertisement
Chapters
Table of Contents
Troubleshooting
