4.
Remove the left guide [D] (
5.
Place the DF exposure glass [F] on the glass holder.
When installing the DF exposure glass, make sure that the side of the DF
exposure glass with two black points faces down.
Do not hold the Mylar strip when installing the DF exposure glass.
Make sure that there is no gap between the two Mylar strips and the scanner
frame. If there is any gap between them, dust may fall into the scanner unit.
SM
x 2) and scanner left cover [E] (hook x 2).
2-27
ARDF (B872)
D067/D068/D069/D072