Ricoh D072 Service Manual page 582

Communication Switch 09 [SP No. 1-104-010]
No FUNCTION
0-7 I-Fax dial interval setting
Communication Switch 0A [SP No. 1-104-011]
No FUNCTION
Point of resumption of memory
transmission upon redialing
0
0: From the error page
1: From page 1
1-7 Not used
Communication Switch 0B – Not used (do not change the settings)
Communication Switch 0C – Not used (do not change the settings)
SM Appendix
COMMENTS
Adjusts the interval of the I-fax dialing.
The interval of I-fax dialing is calculated by
following formula.
[Interval time = specified value with this switch x 2
sec]
COMMENTS
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using
normal memory transmission.
Do not change the settings.
7-43
Bit Switches
D067/D068/D069/D072