Table of Contents
Advertisement
System Service Mode (Basic: D067/D072)
2996*
T Roller Cleaning
Cleans or does not clean the transfer roller before each job. Select "1" if the
backside of the paper becomes unclean when output. Note that the copier
2996 1
takes a longer time to output the first copy when you select "1". If you select
"0", the transfer roller is never cleaned.
2998*
Main Mag- print
Adjusts the magnification (
2998 1
"Replacement and Adjustment"). The specification is 100 ± 1.0%.
D067/D068/D069/D072
[0 = No / 1 = Yes]
[–0.5 to +0.5 / 0.0 / 0.1%/step]
"Adjusting Copy Image Area" in the section
5-152
SM Appendix
Advertisement
Chapters
Table of Contents
Troubleshooting
