Ricoh D072 Service Manual page 577

Bit Switches
Printer Switch 0E [SP No. 1-103-015]
No FUNCTION
Paper size selection priority
0 0: Width
1: Length
Paper size selected for printing A4
width fax data
1
0: 8.5" x 11" size
1: A4 size
Page separation
2 0: Enabled
1: Disabled
Printing the sample image on
reports
Bit 4: 0, Bit 3: 0 = The upper half
only
3-4
Bit 4: 0, Bit 3: 1 = 50% reduction in
sub-scan only
Bit 4: 1, Bit 3: 0 = Same size
Bit 4: 1, Bit 3: 1 = Not used
5-6
Not used
D067/D068/D069/D072
COMMENTS
0: A paper size that has the same width as
the received data is selected first.
1: A paper size which has enough length to
print all the received lines without reduction
is selected first.
This switch determines which paper size is
selected for printing A4 width fax data, when
the machine has both A4 and 8.5" x 11" size
paper.
1: If all paper sizes in the machine require
page separation to print a received fax
message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a
cassette, the machine automatically prints
the fax message.
"Same size" means the sample image is
printed at 100%, even if page separation
occurs.
User Parameter Switch 19 (13H) bit 4 must
be set to "0" to enable this switch.
Refer to Detailed Section Descriptions for
more on this feature.
Do not change the settings.
7-38 SM Appendix