Ricoh D072 Service Manual page 521

Fax Error Codes
Code Meaning
15-15 Mail Divide Error
15-16 Mail Size Receive Error
15-17 Receive Timeout
15-18 Incomplete Mail Received
Final Destination for
15-31 Transfer Request
Reception Format Error
Send/Delivery Destination
15-39
Error
15-41 SMTP Receive Error
15-42 Off Ramp Gateway Error
15-43 Address Format Error
15-44 Addresses Over
D067/D068/D069/D072
Suggested Cause/Action
The e-mail is not in standard format. There is
no boundary between parts of the e-mail,
including the header.
The mail cannot be received because it is too
large.
May occur during manual receiving only
because the network is not operating correctly.
Only one portion of the mail was received.
The format of the final destination for the
transfer request was incorrect.
The transmission cannot be delivered to the final
destination:
Destination file format is incorrect.
Could not create the destination for the file
transmission.
Reception rejected because the transaction
exceeded the limit for the "Auth. E-mail RX"
setting.
The delivery destination address was
specified with Off Ramp Gateway OFF.
Format error in the address of the Off Ramp
Gateway.
The number of addresses for the Off Ramp
Gateway exceeded the limit of 30.
6-22 SM Appendix