Ricoh D072 Service Manual page 326

Black Ave Init
4693
4658 1 EVEN
4658 2 ODD
4658 3 RED
4658 4 GREEN
4658 5 BLUE
4902* Exposure Lamp ON
Turns the exposure lamp on or off. To turn on the exposure lamp, specify "1";
4902 1
to turn it off specify "0".
4903* ADS Level
4903 1 Adjusts the ADS level.
4904* ADS Lower Limit
4904 1 Adjusts the ADS lower limit.
ADS Area Select
4905*
Checks the whole area (0 = All) or the specific areas (1 = One) to adjust the
ADS level. The specific areas are as follows:
4905 1
ARDF: ±37.5 mm from the center
Platen Cover: 15 to 90 mm from the left edge
SM Appendix
System Service Mode (F/SPF: D068/D069)
[0 to 255 / - / 1 /step]
Displays the black offset value of the pre-offset
adjustment in the SBU.
[0: OFF / 1: ON]
[0 to 255 / 252 / 1/step]
[0 to 255 / 80 / 1/step]
[0 = All / 1 = One]
5-17 D067/D068/D069/D072