Initial Service; Preventive Maintenance; Cleaning; Inspecting - Stairmaster FreeClimber Systems Owner's Manual

Hide thumbs Also See for FreeClimber Systems:
Table of Contents

Advertisement

The 4200 PT console keeps track of the number of hours the machine
was used and the total
number
[+ ARROW] and then double-click [RESET]
window and the total floors are shown

INITIAL SERVICE

Upon receiving your machine, use a soft, clean towel to wipe off the dust which
may have accumulated during shipping.
assembly. Refer to the "Installation

PREVENTIVE MAINTENANCE

Most of these preventive maintenance procedures can be performed after
removing the mid cover. The preventive maintenance schedule is summarized in
Table 5. The schedule is based on normal usage in a commercial health club
environment; adjust the schedule to meet actual machine usage. Refer to the
"Parts
Removal and Replacement" section for all disassembly and assembly
instructions.

Cleaning

1.
DO NOT USE GLASS CLEANERS OR ANY OTHER HOUSEHOLD CLEANER
ON THE CONSOLE. Clean the console daily with a water-dampened
cloth and wipe dry after
2.
Clean the exterior of the machine daily using soap and water or a
diluted household cleaner such
3.
Thoroughly clean the entire machine,
a week (see Table 5).

Inspecting

1.
Inspect the frame for any rust, bubbling, or paint chips during the
weekly cleaning. The salt
surfaces.
MAINTENANCE INSTRUCTIONS
of floors climbed. From the ATTRACT mode, press
.
The hours are shown
in
the bottom LCD
window.
Your
new machine will require minor
Instructions"
section for details.
cleaning.
as
including
the
interior,
in
perspiration can damage the unpainted
in
the top LCD
at least once
Page 33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents