D-Link Xstack DES-3528 Series Reference Manual page 127

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
Last Listener Query
Interval (1-25)
Data Driven Group
Expiry Time (1-65535)
Querier State
Fast Done
State
Report Suppression
Data Driven Learning
State
Data Driven Learning
Aged Out
Version
Querier Role
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
After clicking the Modify Router Port
The fields that can be configured are described below:
Parameter
Unit
Static Router Port
By default, the robustness variable is set to 2. You might want to increase this value if
you expect a subnet to be loosely.
The maximum amount of time between group-specific query messages, including
those sent in response to done-group messages. You might lower this interval to
reduce the amount of time it takes a router to detect the loss of the last listener of a
group.
Enter the data driven group expiry time value.
This allows the Switch to be specified as an MLD Querier (sends MLD query packets)
or a Non-Querier (does not send MLD query packets). Set to enable or disable.
Enable or disable the fast done feature.
Used to enable or disable MLD snooping for the specified VLAN. This field is
Disabled by default.
Enable or disable the report suppression features.
Enable or disable data driven learning of MLD snooping groups.
Enable or disable the age out function for data driven entries.
Specify the version of MLD packet that will be sent by this port.
Displays the querier role.
link, the following page will appear:
Figure 4-56 MLD Snooping Router Port Settings window
Description
Select the unit to configure.
This section is used to designate a range of ports as being connected to multicast-
120