Firmware Information Settings - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
This window holds the following information:
Parameter
ID
Version
Size (Bytes)
Update Time
From
User
Click the corresponding Set Boot button to use the configuration file as the boot up firmware for the Switch. This
will apply upon the next reboot of the Switch.
Click the Active button to enable the configuration file settings.
Click the corresponding Delete button to remove this configuration file from the Switch's memory.

Firmware Information Settings

The following screen allows the user to view information about current firmware images stored on the Switch.
To access this table, click System Configuration > Firmware Information Settings
This window holds the following information:
Parameter
ID
Version
Size (Bytes)
Update Time
Description
State the ID number of the configuration file located in the Switch's memory. The
Switch can store two configuration files for use. ID 1 will be the default boot up
configuration file for the Switch unless otherwise configured by the user.
Display the firmware version that has been saved or uploaded in the Switch.
Display the size of the configuration file, in bytes.
Display the time that the configuration file was updated to the Switch.
Display the location from which the configuration file was uploaded.
Display the name of the user (device) that updated this configuration file. Unknown
users will be displayed as Anonymous.
Figure 2 - 2 Firmware Information window
Description
States the image ID number of the firmware in the Switch's memory. The Switch can
store two firmware images for use. Image ID 1 will be the default boot up firmware for
the Switch unless otherwise configured by the user.
States the firmware version.
States the size of the corresponding firmware, in bytes.
States the specific time the firmware version was downloaded to the Switch.
7