D-Link Xstack DES-3528 Series Reference Manual page 261

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Authorization Network State
Authentication Server
Failover
Unit
From Port
To Port
Security Mode
Figure 8-47 Compound Authentication Settings window
Description
Click the radio buttons to enable of disable the Authorization Network State.
Click the radio buttons to configure the authentication server failover function.
Block (default setting) - The client is always regarded as un-authenticated.
Local - The Switch will resort to using the local database to authenticate the
client if RADIUS server cannot be reached. If the client fails on local
authentication, the client is regarded as un-authenticated, otherwise, it
authenticated.
Permit - The client is always regarded as authenticated. If guest VLAN is
enabled, clients will stay on the guest VLAN, otherwise, they will stay on the
original VLAN.
Select the unit to configure.
Use this drop-down menu to select the beginning port of a range of ports to be
enabled as compound authentication ports.
Use this drop-down menu to select the ending port of a range of ports to be
enabled as compound authentication ports.
The compound authentication method options include: None, Any (MAC,
802.1X or WAC/JWAC), 802.1X+IMPB, IMPB+JWAC, IMPB+WAC, and
MBA+IMPB.
None - all compound authentication methods are disabled.
Any (MAC, 802.1X or WAC) - if any of the authentication methods pass, then
access will be granted. In this mode, MAC, 802.1X and WAC/JWAC can be
enabled on a port at the same time. In Any (MAC, 802.1X or WAC/JWAC)
mode, whether an individual security module is active on a port depends on its
system state. As system states of WAC and JWAC are mutually exclusive, only
one of them will be active on a port at the same time.
802.1X+IMPB - 802.1X will be verified first, and then IMPB will be verified. Both
authentication methods need to be passed.
IMPB+JWAC - IMPB will be verified first, and then JWAC will be verified. Both
authentication methods need to be passed.
IMPB+WAC - IMPB will be verified first, and then WAC will be verified. Both
254