Fdb; Static Fdb Settings - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide

FDB

Static FDB Settings

Unicast Static FDB Settings
Users can set up static unicast forwarding on the Switch.
To view the following window, click L2 Features > FDB > Static FDB Settings > Unicast Static FDB Settings, as
shown below:
The fields that can be configured are described below:
Parameter Description
Click the radio button and enter the VLAN name of the VLAN on which the associated
VLAN Name
unicast MAC address resides.
Click the radio button and enter a list of VLAN on which the associated unicast MAC address
VLAN List
resides.
The MAC address to which packets will be statically forwarded or dropped. This must be a
MAC Address
unicast MAC address.
Allows the selection of the port number on which the MAC address entered above resides
Port/Drop
This option could also drop the MAC address from the unicast static FDB.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Multicast Static FDB Settings
Users can set up static multicast forwarding on the Switch.
To view the following window, click L2 Features > FDB > Static FDB Settings > Multicast Static FDB Settings,
as shown below:
Figure 4-36 Unicast Static FDB Settings window
104