Vlan Translation Settings - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
Add Inner Tag
(hex: 0x1-0xffff)
Click the Apply button to accept the changes made for each individual section.

VLAN Translation Settings

VLAN translation translates the VLAN ID carried in the data packets it receives from private networks into those
used in the Service Providers
To view this window, click L2 Features > QinQ > VLAN Translation Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
CVID (1, 5-7)
Action
SVID (1-4094)
Priority
Click Apply to make a new entry.
Click Delete All to remove all entries.
Q-in-Q and VLAN Translation Rules
For ingress untagged packets at UNI ports:
1. The Switch does not reference the VLAN translation table.
2. Check t he Switch VLAN t ables. T he s equence i s MAC-based V LAN -> s ubnet-based V LAN -> pr otocol-
based VLAN -> port-based VLAN. If matched, the matched VLAN will become this packet's 'SPVLAN'.
For ingress tagged packets at UNI ports:
1. The S witch looks up t he VLAN t ranslation t able. I f m atched, t he V LAN tag will be t ranslated ( replace
CEVLAN with SPVLAN, or add SPVLAN).
2. Or, check the Switch VLAN tables. The sequence is the same as above. The matched VLAN becomes this
packet's 'SPVLAN'.
Deselect the Disabled check box and enter an inner tag for the packet to use.
network.
Figure 4-27 VLAN Translation Settings window
Description
Select a unit to be configured.
A consecutive group of ports that are part of the VLAN configuration starting with the
selected port.
The customer VLAN ID List to which the tagged packets will be added.
Specify for SPVID packets to be added or replaced.
This configures the VLAN to join the Service Providers VLAN as a tagged member.
Select a priority for the VLAN ranging from 0 to 7. With 7 having the highest priority.
90