D-Link Xstack DES-3528 Series Reference Manual page 79

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter Description
Allow the entry of a VLAN ID or displays the VLAN ID of an existing VLAN in the Add/Edit
VID
VLAN tab. VLANs can be identified by either the VID or the VLAN name.
Allow the entry of a name for the new VLAN or for editing the VLAN name in the Add/Edit
VLAN Name
VLAN tab.
Select the unit to configure.
Unit
Enable this function to allow the Switch sending out GVRP packets to outside sources,
Advertisement
notifying that they may join the existing VLAN.
Display all ports of the Switch for the configuration option.
Port
Specify the port as 802.1Q tagging. Clicking the radio button will designate the port as tagged.
Tagged
Click the All button to select all ports.
Specify the port as 802.1Q untagged. Clicking the radio button will designate the port as
Untagged
untagged. Click the All button to select all ports.
Click the radio button to specify the port as not being a member of the VLAN and that the port
Forbidden
is forbidden from becoming a member of the VLAN dynamically. Click the All button to select
all ports.
Click the radio button to allow an individual port to be specified as a non-VLAN member. Click
Not Member
the All button to select all ports.
Click the Apply button to accept the changes made.
To search for a VLAN, click the Find VLAN tab. A new tab will appear, as shown below.
Figure 4-5 802.1Q VLAN Settings – Add/Edit VLAN Tab window
72