D-Link Xstack DES-3528 Series Reference Manual page 209

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Access ID (1-100)
VLAN Name
VLAN ID
DSCP
ICMP
Action
Time Range Name
Ports
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
Figure 7-32 Add CPU Access Rule (IPv4 ACL)
Description
Type in a unique identifier number for this access. This value can be set from 1 to 100.
Specify the VLAN name to apply to the access rule.
Specify the VLAN ID to apply to the access rule.
Enter the DSCP value used here.
Select this option to specify that the rule will be applied to ICMP traffic.
• Type – Enter the ICMP packet type value used here.
• Code – Enter the ICMP code value used here.
Select Permit to specify that the packets that match the access profile are forwarded by
the Switch, according to any additional rule added (see below).
Select Deny to specify that the packets that match the access profile are not forwarded
by the Switch and will be filtered.
Tick the check box and enter the name of the Time Range settings that has been
previously configured in the Time Range Settings window. This will set specific times
when this access rule will be implemented on the Switch.
Ticking the All Ports check box will denote all ports on the Switch.
202