Authenticator Statistics - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter Description
Select the unit to be displayed.
Unit
Select a port to be displayed.
Port
Click the Find button to locate a specific entry based on the information entered.
Click the Refresh button to refresh the display table so that new entries will appear.
NOTE: The Authenticator State cannot be viewed on the Switch unless 802.1X is enabled. To
enable 802.1X, go to Security > 802.1X > 802.1X Global Settings, and select Enabled
from the Authentication State drop-down menu.

Authenticator Statistics

This table contains the statistics objects for the Authenticator PAE associated with each port. An entry appears in
this table for each port that supports the Authenticator function.
To view the Authenticator Statistics, click Security > 802.1X > Authenticator Statistics, as shown below:
The fields that can be configured are described below:
Parameter Description
Select the unit to be displayed.
Unit
Figure 8-15 Authenticator Statistics window
221