D-Link Xstack DES-3528 Series Reference Manual page 219

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
Conform – This field denotes the green packet flow. Green packet flows may have their DSCP
Action
field rewritten to a value stated in this field. Users may also choose to count green packets by
using counter parameter.
Exceed – This field denotes the yellow packet flow. Yellow packet flows may have excess
packets permitted through or dropped. Users may replace the DSCP field of these packets by
checking its radio button and entering a new DSCP value in the allotted field.
Violate – This field denotes the red packet flow. Red packet flows may have excess packets
permitted through or dropped. Users may replace the DSCP field of these packets by checking
its radio button and entering a new DSCP value in the allotted field.
Click the <<Back button to discard the changes made and return to the previous page.
Click the Apply button to accept the changes made.
After clicking the View button, the following page will appear:
Click the <<Back button to return to the previous page.
• EBS – Specify the Excess Burst Size. The unit is in kilobyte.
• Replace DSCP – Packets that are in the green flow may have their DSCP field
rewritten using this parameter and entering the DSCP value to replace.
• Counter – Use this parameter to enable or disable the packet counter for the specified
ACL entry in the green flow.
• Counter – Use this parameter to enable or disable the packet counter for the specified
ACL entry in the yellow flow.
• Counter – Use this parameter to enable or disable the packet counter for the specified
ACL entry in the red flow.
Figure 7-47 ACL Flow meter Display window
212