D-Link Xstack DES-3528 Series Reference Manual page 244

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
MAC-based Access
Control State
Method
Password
RADIUS Authorization
Local Authorization
Max User (1-1000)
VLAN Name
VLAN ID
Member Ports
Unit
Figure 8-32 MAC-based Access Control Settings window
Description
Toggle to globally enable or disable the MAC-based access control function on the
Switch.
Use this drop-down menu to choose the type of authentication to be used when
authentication MAC addresses on a given port. The user may choose between the
following methods:
Local – Use this method to utilize the locally set MAC address database as the
authenticator for MAC-based access control. This MAC address list can be configured in
the MAC-based access control Local Database Settings window.
RADIUS – Use this method to utilize a remote RADIUS server as the authenticator for
MAC-based access control. Remember, the MAC list must be previously set on the
RADIUS server.
Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is "default".
Use the drop-down menu to enable or disable the use of RADIUS Authorization.
Use the drop-down menu to enable or disable the use of Local Authorization.
Enter the maximum amount of users of the Switch. Tick No Limit to have unlimited
users.
Enter the name of the previously configured Guest VLAN being used for this function.
Click the radio button and enter a Guest VLAN ID.
Enter the list of ports that have been configured for the Guest VLAN.
Select the unit to configure.
237