D-Link Xstack DES-3528 Series Reference Manual page 49

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
Interface Admin State
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
Click the IPv4 Edit button to see the following window.
The fields that can be configured are described below:
Parameter
Get IP From
Interface Name
IPv4 Address
Subnet Mask
VLAN Name
IPv4 State
Interface Admin State
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
Click the IPv6 Edit button to see the following window.
Use the drop-down menu to enable or disable the Interface Admin State.
Figure 3-10 IPv4 Interface Settings – IPv4 Edit window
Description
Use the drop-down menu to specify the method that this Interface uses to acquire an IP
address.
Enter the name of the IP interface being configured.
Enter the IPv4 address used.
Enter the IPv4 subnet mask used.
Enter the VLAN Name used.
Use the drop-down menu to enable or disable IPv4 State.
Use the drop-down menu to enable or disable the Interface Admin State.
42