Time Settings; User Accounts Settings - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
following parameters:
Start Time - Use this parameter to identify the starting time of the time range, in hours, minutes
and seconds, based on the 24-hour time system.
End Time - Use this parameter to identify the ending time of the time range, in hours, minutes
and seconds, based on the 24-hour time system.
Use the check boxes to select the corresponding days of the week that this time range is to be
Weekdays
enabled. Tick the Select All Days check box to configure this time range for every day of the
week.
Click the Apply button to accept the changes made. Current configured entries will be displayed in the table in the
bottom half of the window shown above.

Time Settings

Users can configure the time settings for the Switch.
To view the following window, click System Configuration > Time Settings, as shown below:
The fields that can be configured are described below:
Parameter
Date (DD/MM/YYYY)
Time (HH:MM:SS)
Click the Apply button to accept the changes made.

User Accounts Settings

The Switch allows the control of user privileges.
To view the following window, click System Configuration > User Accounts Settings, as shown below:
Figure 2-23 Time Settings window
Description
Enter the current day, month, and year to update the system clock.
Enter the current time in hours, minutes, and seconds.
28