Reboot System - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
NOTE: Only the Reset System option will enter the factory default parameters into the Switch's non-
volatile RAM, and then restart the Switch. All other options enter the factory defaults into the
current configuration, but do not save this configuration. Reset System will return the Switch's
configuration to the state it was when it left the factory
NOTE: The serial port's baud rate will not be changed by the reset command. It will not be restored to
the factory default setting.
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other
configuration parameters to their factory defaults. If the Switch is reset using this window, and Save Changes is
not executed, the Switch will return to the last saved configuration when rebooted.
Open the Tools drop-down menu at the top of the Web manager and click Reset to see the following window:
The fields that can be configured are described below:
Parameter
Reset
Reset Config
Reset System
Click the Apply button to initiate the Reset action.

Reboot System

The window is used to restart the Switch.
Open the Tools drop-down menu at the top of the Web manager and click Reboot System to see the following
window:
Click the Yes radio button will instruct the Switch to save the current configuration to non-volatile RAM before
restarting the Switch.
Click the No radio button instructs the Switch not to save the current configuration before restarting the Switch. All
of the configuration information entered from the last time Save Changes was executed will be lost.
Click the Reboot button to restart the Switch.
Figure 12-10 Reset System window
Description
Selecting this option will factory reset the Switch but not the IP Address, User Accounts
and the Banner.
Selecting this option will factory reset the Switch but not perform a Reboot.
Selecting this option will factory reset the Switch and perform a Reboot.
Figure 12-11 Reboot System window
349