D-Link Xstack DES-3528 Series Reference Manual page 205

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Access ID (1-100)
VLAN Name
VLAN ID
Ethernet Type (0-FFFF)
Action
Time Range Name
Ports
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
After clicking the Show Details button in the CPU Access Rule List, the following page will appear:
Figure 7-27 Add CPU Access Rule (Ethernet ACL)
Description
Type in a unique identifier number for this access. This value can be set from 1 to
100.
Specify the VLAN name to apply to the access rule.
Specify the VLAN ID to apply to the access rule.
Enter the appropriate Ethernet Type information.
Select Permit to specify that the packets that match the access profile are forwarded
by the Switch, according to any additional rule added (see below).
Select Deny to specify that the packets that match the access profile are not
forwarded by the Switch and will be filtered.
Tick the check box and enter the name of the Time Range settings that has been
previously configured in the Time Range Settings window. This will set specific times
when this access rule will be implemented on the Switch.
Ticking the All Ports check box will denote all ports on the Switch.
198